Materials

Paper Recycling Machine & Equipment

Paper is a valuable commodity which is readily recycled, using paper recycling machines. PRM can offer equipment to cover every aspect of paper recycling equipment, from shredding and conveying through to baling and eddy current/over band magnet separators for the removal of contaminants.

Imabe Fully Automatic Baler

Imabe auto-tie horizontal baling machines are designed to press with high efficiency and produce high denisty bales of paper, cardboard, plastic and others materials. They are a benchmark in the pressing and processing of recyclable materials, due to its solid structure and its high-power hydraulic system

The structure of the…

Imabe Twin Ram Balers

Twin-ram balers are designed for baling difficult product such as hard plastic, cardboard, steel and aluminium cans.
The twin-ram baler has a high throughput with minimal labour cost.
Continuous and fully automatic operation of the baler is controlled by an integrated PLC control system that feeds the material into the hopper, bale…

Industrial Conveyor Belts For Waste

Belt conveyors are so versatile that they are used in almost every industrial environment imaginable, so getting the right conveyor for your application can be a challenge.
Our engineers can specify the correct specification belt conveyors to fit into your existing assembly or process lines, or we can design completely new…

Industrial Granulator For Recycling

THM‘s Universal Industrial Granulator XG is used for single-stage shredding of a variety of different materials. THM’s recycling granulators, the XG series, perform brillitantly on wood, RDF, cable scrap, electronic scrap, metals or other materials.

Thanks to the large inlet opening, the AG Granulator can shred very large and bulky…

Industrial Pre Shredder Machinery

The XL Pre Shredder from THM with enormous appetite for all kinds of scrap. The more and the coarser the better. The massive structure of the shredder is designed for the size reduction of the most difficult materials without compromise.

The forged rotor and the extreme robust knives keep cutting…

JOEST Wheelie Bin Lifter

Joest Bin Lifter can be used anywhere where bulk goods require transport, lifting or dumping.
The lifting and tipping equipment optimises and automates the material flow for bulk goods, provide maximum security and minimize stress for humans and the environment.

The technological layout is determined by special customer requirements and specific…

Metal Rotor Granulator Machinery

The AG series is an all purpose rotor granulator for any task. The extremely robust AG Granulator was developed as a metal granulator machine but also performs very well when size reducing other material such as cable waste, plastics and other materials. No matter which type of material is fed…

Steel Slat Conveyor

Steal slat conveyors are a low-cost, easy maintenance method for transporting various materials.
Based around our proven designs and using quality components we manufacture reliable slat chain conveyors using stainless steel frames, steel slats depending on your requirements.
The conveyors can be used as stand-alone conveyors, full conveyor systems or easily integrated…

TSM1500

THM’s Two-shaft rotor shear, designed for a long life cycle and easy maintenance. With its massive and screwed machine housing as well as the exchangeable knives, this shredder sets new standards in the crushing of metals, plastics, composites, rubber and much more.

Rotor Shear TSM1500

The machine offers added value…

Vincent CP Series

PRM Waste Systems provide a range of Vincent screw presses which are suitable for a range of organic materials. The Vincent is characterised by a screw of progressively reducing pitch which rotates inside a cylindrical perforated screen.

Material entering the hopper is subjected to gradually increasing pressure as it moves…

Vincent KP Series

The Vincent KP Series Screw Presses are our most popular, probably because of relatively low cost.  They are best suited for applications like food waste processing, which requires less torque than offered by the VP and CP Presses.  The KP’s with screws up to 16″ diameter use hollow bore gearboxes, while units…

Vincent VP Series

VP Series Screw Presses operate the same as the CP series but are larger, high torque machines, with relatively long screens.  They are commonly used in pulp & paper, corn wet milling, and spent coffee applications, where the press cake requires maximum dewatering.  They feature foot mounted gearboxes; screw diameters…

ZMK Series

The ZMK Series is the granulator for extreme tasks and high throughput. With its large rotor diameter, reinforced housing, extremely solid stator-blade-beam and a rotor that is lined with massive cast wear plates, this granulator is almost up to any task.

The enormous rotor mass creates high torque, which can…