Materials

Plastic Recycling Machine Equipment

Plastic recovery is a key part of the recycling process with approximately 8 million metric tonnes entering the world’s oceans every year. At PRM we have over 40 years’ experience in providing processing equipment to help your industry process this valuable commodity using our plastic recycling machines.

Air Vibe

The Joest AirVibe separates by material densities, shapes and surface characteristics into the desired product groups. The unique combination of multistage ballistic and cross flow air-separation ensures a very high degree of separation. This opens up new ways in the processing and separation in the recycling industry.

The AirVibe uses…

CM100 (Cutting Mill)

Perfect for cutting into small granules. The THM CM Cutting Mill is the right choice for cutting of pre-size-reduced parts into smaller granules. Size reduction takes place by a wear resistance rotor with rotating knives which are cutting against stator knives.

The final granule size is determined by the size…

Imabe Fully Automatic Baler

Imabe auto-tie horizontal baling machines are designed to press with high efficiency and produce high denisty bales of paper, cardboard, plastic and others materials. They are a benchmark in the pressing and processing of recyclable materials, due to its solid structure and its high-power hydraulic system

The structure of the…

Imabe Twin Ram Balers

Twin-ram balers are designed for baling difficult product such as hard plastic, cardboard, steel and aluminium cans.
The twin-ram baler has a high throughput with minimal labour cost.
Continuous and fully automatic operation of the baler is controlled by an integrated PLC control system that feeds the material into the hopper, bale…

Industrial Conveyor Belts For Waste

Belt conveyors are so versatile that they are used in almost every industrial environment imaginable, so getting the right conveyor for your application can be a challenge.
Our engineers can specify the correct specification belt conveyors to fit into your existing assembly or process lines, or we can design completely new…

Industrial Granulator For Recycling

THM‘s Universal Industrial Granulator XG is used for single-stage shredding of a variety of different materials. THM’s recycling granulators, the XG series, perform brillitantly on wood, RDF, cable scrap, electronic scrap, metals or other materials.

Thanks to the large inlet opening, the AG Granulator can shred very large and bulky…

Industrial Pre Shredder Machinery

The XL Pre Shredder from THM with enormous appetite for all kinds of scrap. The more and the coarser the better. The massive structure of the shredder is designed for the size reduction of the most difficult materials without compromise.

The forged rotor and the extreme robust knives keep cutting…

JOEST Wheelie Bin Lifter

Joest Bin Lifter can be used anywhere where bulk goods require transport, lifting or dumping.
The lifting and tipping equipment optimises and automates the material flow for bulk goods, provide maximum security and minimize stress for humans and the environment.

The technological layout is determined by special customer requirements and specific…

Joest Zig – Zag – Industrial Separator

The JOEST ZigZag industrial separator is designed to separate bulk materials by shape, size and density using airflow and gravity. Lightweight material is blow upward and extracted through the top of the ZigZag while large high density material falls for collection at the bottom.

The JOEST ZigZag has a very…

Metal Rotor Granulator Machinery

The AG series is an all purpose rotor granulator for any task. The extremely robust AG Granulator was developed as a metal granulator machine but also performs very well when size reducing other material such as cable waste, plastics and other materials. No matter which type of material is fed…

MP-32

The MP32 Portable Compactor has a sealed rear tailgate to ensure maximum control of wet waste is achieved
The compact design allows the unit to be sited in areas that would normally be unsuitable for more conventional compactors.

Benefits include:
Safe and easy to operate
Can generate a revenue
Reduce number of uplifts and…

MP14-15

The units are particularly suitable for use with waste that has a predominantly dry content e.g:. cardboard, shrink wrap, strapping, broken pallets, floor sweepings and trim waste etc.
The operational method of these compactors make them ideal for incorporation into a variety of complete waste handling systems.
Standard specification includes auto pinning…

Portable Waste Compactor Machine

The MP14 Portable Compactor has a sealed rear tailgate which ensures maximum control of wet waste is achieved.
The portable waste compactor has a compact design to allow the unit to be sited in areas that would normally be unsuitable for more conventional compactors.

Runi SK240 Dewatering

The RUNI SK240 Screw Compactor can also be used as a dewatering/depackaging screw for PET bottles and ALU cans; The screw is adapted for this application which makes it possible to put full containers into the hopper and separate the PET or ALU from the contents.
This process optimises the recyclable…

Runi SK240 Screw Compactor

RUNI SK240 screw compactors are the second largest machines for compacting EPS and recommended for an annual volume of 30-50 tonnes.
The screw compactor can compact the EPS at a ratio of up to 50:1. Before compacting 50 trucks were needed to take the EPS to landfill and now only one…

Runi SK370 Dewatering

The use of the RUNI SK370 dewatering Screw Compactor for depackaging and liquid separation is a key process in volume and weight reduction of waste products. The process separates liquid from containers in order for the component parts to be recycled and reused.

Typical applications include:
Anaerobic Digestion plants, cosmetics, pharmaceuticals,…

Runi SK370 Screw Compactor

RUNI SK370 screw compactors are the largest machines for compacting EPS and recommended for an annual volume of more than 50 tonnes. The SK370 screw compactor can compact the EPS at a ratio of up to 50:1. Before compacting it took 50 trucks to take the EPS to landfill –…

Runi SK370 TWIN Screw Compactor

Static Waste Compactor

The MP12-10 Static Waste Compactor has been designed to meet the needs of producers of medium volumes of commercial and industrial waste products.

With a high compaction ratio, our Static Compactor ensures skips carry the maximum weight to lessen the number of uplifts, and in turn save you transport costs.

Trommel Screen

Trommels are effective at screening multiple materials such as organics, plastics and metals. They can be used to separate large volumes of material with interchangeable screening sections.

Vibrating Feeder

Joest designs and manufactures an extensive range of resonance based feeders which are suitable for a number of applications for the recycling and quarrying industries.

Vibratory Screen Separator Equipment

The JOEST TopSpin is a vibratory screen separator used for the pre-separation of waste which is difficult to screen. Cascade vibratory screening equipment is increasingly used for this process – the advantage is that they screen out long parts with almost no blockages.

The finger cascade screen works on basis…

Vincent CP Series

PRM Waste Systems provide a range of Vincent screw presses which are suitable for a range of organic materials. The Vincent is characterised by a screw of progressively reducing pitch which rotates inside a cylindrical perforated screen.

Material entering the hopper is subjected to gradually increasing pressure as it moves…

Vincent KP Series

The Vincent KP Series Screw Presses are our most popular, probably because of relatively low cost.  They are best suited for applications like food waste processing, which requires less torque than offered by the VP and CP Presses.  The KP’s with screws up to 16″ diameter use hollow bore gearboxes, while units…

ZM Series

The extremely robust ZM Granulator was developed for the size reduction of metals but also performs very well when size reducing other materials such as cable waste, plastics and other materials. No matter which type of material is fed into the ZM Granulator – metal, recyclable waste or substitutes fuels –…

ZMK Series

The ZMK Series is the granulator for extreme tasks and high throughput. With its large rotor diameter, reinforced housing, extremely solid stator-blade-beam and a rotor that is lined with massive cast wear plates, this granulator is almost up to any task.

The enormous rotor mass creates high torque, which can…